|
Foundation
Products Basement Products
Specialty Products
"The products
listed below aren't in inventory but can be shipped directly to you"
"Don't Live With A Leaky
Basement Any Longer
- Aqua-Stop It!"
Aqua-Stop Basement
Waterproofing System
AQUA-STOP is
a crystalline cementitious waterproof finish, that bonds to any
concrete surface to form a water tight barrier, protecting against
unwanted water penetration on interior or exterior surfaces. Highly
effective for repairing wet basement walls and floors, AQUA-STOP can
make even the wettest basement a dry livable space. With it's mix
and use formulation, the ease of application can be simple and
convenient for anyone.
AQUA-STOP is ideal for the home owner with a problem leaky
basement. No need to spend thousands to make your problem go away,
AQUA-STOP will do it easily and economically. Once treated,
Aqua-stop will continue working for the life of the building!
AQUA-STOP is Permanent!
Thinking of selling your house? Have a wet or damp basement? You
will probably have to sell below market value if your basement is
wet. But if you could cure the problem, and give the purchaser a
guarantee of a permanently dry basement, then you sell for thousands
more!
Basement waterproofing companies can charge you thousands (up to
$30+ per linear foot!) to cure the problem, but all this can be done
easily for the fraction of that price with our one step Do It
Yourself Aqua-Stop basement waterproofing system. You don't have to
pay thousands for an expensive basement waterproofing contractor,
and you can apply the product ONLY to the area which needs to be
fixed whenever it's convenient for You!
AQUA-STOP is not a coating or waterproof paint that just sits
on the surface of the wall. It must be applied to bare concrete so
that it can penetrate deep below the surface to stop water before it
reaches the inside of the basement.
|
Before
Water coming to the basement
through the Concrete Wall
|
After
Aqua-Stop applied - water
Stopped Permanently!
|
Aqua-Stop is not only a coating, it
becomes a permanent, integral part of the
concrete.
AQUA-STOP
basement waterproofing product is manufactured using high quality
commercial grade materials, to ensure a strong, adhesive waterproof
coating, that can withstand extremely high hydrostatic pressures,
(up to 200 psi) while still allowing the wall to breathe.
Also used for new construction, restorations or renovation projects,
commercial and industrial projects, above grade exterior surfaces,
water cisterns, swimming pools and ponds, retaining walls AQUA-STOP
does it all.
Just a few famous examples of the Crystalline technology used
for:
- The Channel Tunnel linking France to England
- Main Stadium at the 2000 Olympics site in Sydney,
Australia
- Maybank's new record setting twin towers headquarters in
Kuala Lumpur, Malaysia
- Bank of China massive new headquarters in Beijing
- Re-lining of vast conduit sections of the Panama Canal
- New public transport wharf facilities around Sydney
harbor...and many more...
|
Benefits of Aqua-Stop basement waterproofing system
- Ready and very simple to use, just add to water, mix and
apply.
- Most economical Basement Waterproofing system on the market
today
- 1 Pail will cover approximately 300 sq. ft.
- No Odor or Fumes
- Interior or Exterior use
- Permanent Treatment - will last the lifetime of the structure
- Can be applied to damp or wet surfaces
- Enviromentaly Friendly - can even be used to waterproof fish
ponds and swimming pools
- Resistant to freeze-thaw
- Permanently active
- Can be applied to concrete, cement block and bric
- Highly resistant to positive and negative hydrostatic pressure
up to 200 psi!
Interior application: basement
Small brush supplied with the product!
|
Exterior application
|
For
AQUA-STOP Basement Waterproofing Technical Data Click Here!
(will open in a new window)
If your basement wall has cracks then they must be repaired and
filled before you apply AQUA-STOP.
|
If the crack
has water leaking through it then you need to seal it with
Aquaseal’s SUPER-STOP. This
is an ultra fast setting, chloride free hydraulic cement which
sets immediately when exposed to water – it will plug and stop
active water leaks in less than 30 seconds.
SUPER-STOP can be applied in
dry form to active leaks and it will mix with the incoming water
to stop the leak, or you can mix it with a small amount of water
and hold it in place over the leak until the material sets
(10-30 seconds). |
SUPER-STOP is a commercial grade
product that incorporates the latest in European technology. It is
imported from Germany and is now available to the North American
residential market for the first time.
For
SUPER-STOP Technical Data Click Here! (will open in a new
window)
For wall cracks that are dry, AQUA-STOP
CRACK FILLER is a waterproof repair and sealing mortar
containing rapid setting Portland cement, specially treated quartz
sand and a compound of active chemicals. The crack filler reacts
with moisture and free lime in the mortar and concrete and creates
insoluble crystalline complexes which penetrate deep into the
concrete. It remains deep in the concrete for the life of the
structure and can withstand extremes of hydrostatic pressure,
effectively sealing the crack permanently.
For
AQUA-STOP CRACK FILLER Technical Data Click Here! (will open in
a new window)
DO-IT-ALL is a
multi-purpose clear acrylic penetrating sealer that can be used on
all interior and exterior surfaces around the home. Whether
you have old stucco that has gone powdery with age, flaking bricks
or concrete, a wooden deck that has dried out, paint that is
peeling, or a new interlocking-brick walkway or concrete driveway
that you would like to protect, then DO-IT-ALL is the product you
need.
It comes as a concentrate and is diluted with tap water at a rate of
3:1. It can be applied with a hand sprayer, brush or roller and the
coverage when diluted is 275-300 sq. ft. per gallon. DO-IT-ALL can
be applied to, brick drywall, stucco, metal, concrete, asphalt
shingles, plaster, and wood.
Some of the uses for DO-IT-ALL include:
- Fixing leaking roofs – spray or pour diluted DO-IT-ALL (2:1
dilution) onto the area of the roof with the leak and it will find
the leak and seal it
- Exterior waterproofing on stucco or as a treatment for
restoring old stucco- reviving it for another 5+ years
- Mold preventive spray – DO-IT-ALL contains high amount of
mildicide and can be applied to either painted or unpainted
drywall, to prevent mold.
- Apply to basement walls before applying drywall to prevent
mold growth and a musty smell
- Seal the concrete floor in your garage to prevent dust and
resist stains
- Can be used over old peeling paint - remove any loose or
blistered areas and then apply DO-IT-ALL before repainting
- Restores clay or cement roof tiles that have been faded by the
sun (CA, NM, FL etc.)
-
and more...
With so many
uses around your home, this product really does “DO-IT-ALL” Whether
you’re protecting newly installed surfaces such as interlocking
brickwork, preventing the growth of mold and fungus, or renovating
your basement, DO-IT-ALL seals and protects to prevent damage from
sun and weather, or restores old surfaces to look almost new again.
Not only is DO-IT-ALL versatile but its economical as well. A one
gallon container of concentrate costs $95.00, including delivery.
Just add tap water and you have 4 gallons of product – enough for
1,000 square feet of coverage! This means that each ready to use
gallon of DO-IT-ALL costs $23.75 – THAT’S LESS THAN 9 CENTS A
SQUARE FOOT, DELIVERED!! So forget about going to the crowded
building center this weekend – just order DO-IT-ALL here and UPS
will deliver it right to your door. What could be easier than that?
We have listed some of the uses for DO-IT-ALL around your home, but
there are lots of others we probably haven’t thought of yet.
For
Suggested Applications Click Here!
For DO-IT-ALL Technical Data Click Here!
|
